FLIXO PAINTS WATER PROOF CEMENT PAINT is a Premium Waterproof Cement Paint, specially designed for better brush ability, easy mixing and application, longer pot life and extra coverage benefit.
It is the best protective cement paint coat against moisture and decay causing bacteria. Our Cement Paint is based on white Portland cement and special additives which make it easy to application and increase water repellency.
PERFORMANCE FEATURES & BENEFITS
•Superior brush ability.
•Greater coverage & lesser labor cost.
•Has longer pot life compared to the competitor.
•Wall & fiberboards.
•Asbestos Cement sheets.
•Concrete blocks & bricks.
•Decorative cement products.
New masonry surfaces must be allowed to cure completely.
New masonary surfaces must be allowed to cured for 4-5 weeks.
Ensure the surface is completely free from all dirt, loosely held plaster, powdery residue, oil grease or any other contamination. Additional action should be taken on fungus, algae or moss etc.
To one volume of fresh water in a clean container add equal volume of FLIXO PAINTS WATER PROOF CEMENT PAINT (1:1) and stir well to get uniform consistency. No further dilution is required and FLIXO PAINTS WATER PROOF CEMENT PAINTis ready for application.
There will be Variation on actual coverage according to the porosity and texture of the surface. However When mixed to normal consistency, approximate covering capacity is as follows.
Coverage - 30-45 Sqft / Kg/ coat, when applied on smooth surfaces.
*Actual coverage may vary depending on method & condition of application, surface roughness.
|Nature||Fine powder form|
|Base||>White Portland cement and other additives|
|Colour||Available in many attractive shades.|
|Finish||Beautiful matt finish.|
|Curing||1st & 2nd coat should be cured properly.|
|Drying Time||6-8 hours depending on climatic conditions.|
|Recoating period||6-8 hours depending on climatic conditions.|
|Shelf life||01 year|
PAINT APPLICATION PROCESS
|STEP 1||PRE WETTING||Pre-wet thesurface with clean water,wait for 30 min.|
|STEP 2||FLIXO PAINTS WATER PRROOF CEMENT PAINT BRUSH / SPRAY||12-18 HRS|
|STEP 3||WETTING WITH WATER FINE SPRAY OF WATER||Wait for 30 min.|
|STEP 4||SNOWCEM PLUS BRUSH / SPRAY||12-18 HRS|
|STEP 5||WETTING WITH WATER FINE SPRAY OF WATER||1 or 2 curingrequired for completely setting of paint.|
HANDLING & STORAGE
Keep sacks airtight during handling and storage to avoid loss of material. Store FLIXO PAINTS WATER PROOF CEMENT PAINT in a cool dry place and also protect it from extreme climatic conditions during storage, in transit and at site.
FLIXO PAINTS WATER PROOF CEMENT PAINT is not recommended for external application to common bricks unless these bricks are dry at the time of application and design of the structure affords maximum protection from moisture penetration.
•Normal curing after 1st and 2nd coat should be followed. Surfaces with oil or resin based paints should not be painted with FLIXO PAINTS WATER PROOF CEMENT PAINT.
•Inter mixing of shades is also not recommended. Use of dark shades is not recommended over large unrelieved areas as efflorescence may appear more prominently on dark shades. Dark shades require more curing than light shades.
5Kg and 25 Kg Pail, and 25 Kg Bag
White and 21+ standard shades & given.
Special shades as per requirement.